Page 1 of 2

send frequency and track density

Posted: Wed Jan 27, 2016 9:48 am
by focus
I think that a feature allowing the user to set how often the tracker sends data to the server depending on whether the tracker is moving or idle is very important. The same about how often it records track points: it should depend either on the speed or just on whether it is mowing or staying in/around one place.

Re: send frequency and track density

Posted: Wed Jan 27, 2016 7:13 pm
by admin
Hi,
Thanks for your input, I will think about it. That would be certainly useful in some situations.

Re: send frequency and track density

Posted: Thu Jun 23, 2016 8:58 am
by hyteoo
I subscribe to this.
It would be really usefull to implement speed-dependant update rates, especially when static, it would be useless to send 100s of updates every 5s. with the same location.

Also, can the 5s update rate be decreased? If not for the free, at least for the paid tracks version?

Re: send frequency and track density

Posted: Sat Jun 25, 2016 2:05 pm
by admin
Yes, this certainly would make sense. Actually a similar feature request already exists. So it is possible that this feature will come in the future (but not in the close future).

Re: send frequency and track density

Posted: Sat Jun 25, 2016 3:31 pm
by hyteoo
Great!
How about that 5s? Is it a server thing?
If not, it would be great to have less than 5s update, my tables is installed in my car so power consumption is irrelevant.

Re: send frequency and track density

Posted: Sat Jun 25, 2016 4:31 pm
by admin
It was planned as feature which users can purchase but so far this feature never was enabled because the location cannot be published faster than in let's say 3 seconds. I will think about if it makes sense to provide such a feature in the future. But do you really think it will be useful to have shorter intervals? GPS will always have some measuring errors anyway.

Re: send frequency and track density

Posted: Tue Jun 28, 2016 5:19 am
by hyteoo
Hi

as it's just a parameter, I guess technically it should not be a problem.
So don't limit this, as the minimum limit would depend on multiple factors like hardware capabilities, GPS reception.
It would also be more like trial and error to find the minimum value.

Maybe just add a warning text label in the activity - below the selectbox saying it is not recommended to go below 5s.

Thanks!

Re: send frequency and track density

Posted: Tue Jun 28, 2016 7:42 am
by admin
Well, I have also to take care on the server. Extremely low intervals would cause more load on the server. Moreover, try and error could be a bit dangerous for a paid feature. I guess some users could be frustrated if they pay for this feature and afterwards they realize that the map still will not update every second.

Re: send frequency and track density

Posted: Sun Oct 01, 2017 10:20 am
by javrfrm
(oct_2017)
"Show your own location live on Google Maps. This way your family and friends always know where you are and that you are safe." - can they see a timeline ? For example where I am now, where I was 10 minutes ago, where I was 20 minutes ago, where I was 30 minutes ago, etc ?
Because once you move from a GPS-location (5 meters accuracy) to a WiFi-location (50 meters accuracy) or a cell-tower-location (500 meters accuracy), the app with no time-line is completelly useless.

"Important for battery saving: By default this app is configured for high frequency tracking and high accuracy, which needs quite much battery."
- is there a Setting, where I can set to share my location once every 15 minutes, once every 30 minutes, once every 60 minutes ?

Re: send frequency and track density

Posted: Sun Oct 01, 2017 9:11 pm
by javrfrm
Found the answer to my second question.
Still looking for "timeline".
And why the app needs access to my photos, etc.

Image

Image